There are many ways you can clean your drain, but depending on how bad it is there are some hardcore methods you need to use. Jetting is one of the quickest ways to get the job done and nowadays companies perfected the way it is done. It is great for cleaning sludge, grease, sand, and ice. A high-pressured stream of water is used that smashes the debris and takes it away. The pressure of the jet nozzle takes the hose down the pipes and gives you full cleaning action.
This job can be done by one person even you can do it if you follow all the instructions. If you don’t feel like you should do it then don’t and call a sewer drain cleaning agency for help. Maybe you don’t have the right equipment like strong enough pump, so getting some advice before starting is a smart choice.
Safety is the number one priority in every job you do, so keep in mind that this can be dangerous in some situations. Always use safety glasses so debris won’t make you any damage or when it comes to vibration by the hose, the plastic safety glasses are a perfect protection. Because most of the cleaners are electric you need to check the cables for any cuts. Remember that you work in a wet area, so you don’t want any of that getting to the electric cables.
You need to use the right kind of gloves that won’t split the hose out of your hand if that happens and you point the high-pressure spray on someone it can penetrate the skin. If you are using a gas jet, from time to time check the oil in the engine.
Type of nozzles
With the use of specialized nozzles, your jetter can be equipped for almost any situation. Use the powerful penetrating nozzle for maximum power to cut through grease and ice. Use the wide spray flushing nozzle to clean and pressure wash the pipe walls thoroughly. Use the spring leader nozzle for getting around tight bends and P-traps. The optional down head nozzle takes the hose down T’s and difficult bends. Leave the lines crystal clear with the optional rotary nozzle. It scours the walls of the pipe for real wall to wall cleaning action. Read more on this page.
It is best to start with the penetrating nozzle to break through the stoppage. And then, follow up with the wide spray nozzle for a thorough cleaning job. Consult with someone who is familiar to the job and knows what can be stuck in the pipes at your area.
How to operate?
To begin, position the machine several feet from the drain opening to allow enough room to work with the hose. The best way would be if the cleaning is done from the street to the building. You should use the brake on four-wheel models and run the water for several seconds to make use it is clear of sediment. Next step is to connect the hose to the water jet. Select a nozzle and thread it onto the end of the hose. Then slide the hose down the drain as far as it can go. Make sure the hose is at least around the first bend to prevent splash back. Use the maximum water flow you have.
Turn on the jet output valve to get the air out of the hose before turning on the jet. Make sure the vibra-pulse valve is off. You should hear the water flowing in the drain. Allow the hose to slide down the line a few feet then pull the hose back half the distance advanced. The actual cleaning takes place when the hose is pulled back toward the operator. Move the hose back and forth to break up the stoppage and flush it down the line.
The cart reel is perfect when you are using the gas jets on indoor applications where the exhaust fumes can be dangerous. Simply place the gas machine safely outdoors. Then, pull the hose into the building and connect it to the portable reel. The handy reel also includes a foot pedal, water flows when you step on the pedal, so both hands are free to control the hose.